What is the difference between a 4 and 5 thread overlocker?
A 2-4 thread serger: This machine has the capabilities of a true safety stitch and a two-thread overlocked edge. … A 5-thread serger: This machine is in the expensive range but has all the seam capabilities you could want. Three threads are used on the overlocked edge and two are used for the straight seam line.
How many threads does an overlocker need?
The majority of overlockers have four spools that are threaded into the machine, with two threads passing through a pair of needles. The three right hand threads finish the raw edge of the fabric.
What do Sergers do?
A serger, commonly referred to as an overlock machine, combines three functions into one simple operation-stitching a seam, trimming the excess seam allowance and overcasting the edge of your fabric-allowing you to achieve professional quality stitching in a short amount of time.
Can you use overlock thread for regular sewing?
Serger thread is tempting to use in your domestic sewing machine because it’s cheap (the giant cones can cost under $5), but it isn’t made for your personal machine. If you use a cone of serger thread instead of regular, all-purpose thread, it will break and jam in your sewing machine.
What thread should I use for overlocker?
For perfect results on your overlocker and coverstitch machine it is essential to use a good quality thread that is lint free. For that reason we only stock the highest quality Polyester 120’s and 180’s overlocking thread.
What is a 3 thread overlocker used for?
The three-thread overlock seam is most useful when sewing knits. It can be used to sew woven fabrics, but not in areas that will receive a lot of stress. The three-thread can also be used to sew pintucks, make narrow rolled hems, and to finish fabric edges.