Why are my stitches wavy?

Why are my straight stitches wavy?

The presser foot you are using is incorrect. – Attach the presser foot that is correct for the type of stitch you want to sew. 2. The thread tension could be in correct.

Why do my stitches look weird?

Here’s an example of what straight stitches look like with varying tensions. When it’s just right, your stitch will look like the one in the middle. The one on the left is too tight, causing the fabric to pucker, while the one on the right is too loose, making the stitches loopy.

Why does my top stitch look wrong?

Poor thread tension on a machine-sewn seam can result in an unstable seam, puckering, or just plain unattractive stitching. Perfect machine stitches interlock smoothly and look the same on both sides of the fabric. If you see small loops on the right or wrong side, the thread tension isn’t correct.

Why is my bottom stitch messy?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

THIS IS FUN:  Does pencil wash out of quilt?

How do you fix puckered stitches?

The best way to fix a puckered seam, start by adjust the tension on upper and lower thread appropriately. This will help understand the content and weight of the fabric that you are using. Next, use a correct thread with right needle size and match the thread with a needle depending on the fabric used.

What should my stitch width be?

What stitch length should I use?

What is the best stitch for: Suggested Stitch Length (mm) Stitches Per Inch
Standard Stitch Length 2.5 – 3.0 8 – 10
Basting stitch 5.0 – 7.0 4 – 5
Stay-stitching 1.5 – 2.0 12 – 8
Top-stitching – light/medium weight 3.0 – 3.5 7 – 8

Why is the tension wrong on my sewing machine?

Needles, threads, and fabrics: Different thread sizes and types on top and in the bobbin can throw off basic tension settings. A needle that’s too large or small for the thread can also unbalance your stitches, because the size of the hole adds to or reduces the total top tension.