Why won’t my bobbin Wind singer?
The Singer 15 Manual notes that your bobbin winder may not work if the pressure of the bobbin tire against the balance wheel is insufficient. To adjust the bobbin winder, loosen the screw shown at #6. Then lightly press the bobbin winder until the tire is in closer contact with the balance wheel.
Why is my sewing machine not picking up the bobbin thread?
First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.
Is the bobbin case supposed to spin?
Be sure the bobbin is inserted so that the bobbin will turn clockwise when the thread is pulled. … The bobbin should be turning clockwise when thread is pulled. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle.
How does bobbin winder work?
When To Use: Bobbin winders, whether built into the machine or a portable machine, help to wind the thread on the bobbin and help to distribute the bobbin thread evenly so that it will be compatible with the tension of the top sewing machine thread.
Why is my bobbin jumping?
The bobbin was installed in the bobbin case wrong. Remove the bobbin from the bobbin case and reinstall the bobbin according to the instruction manual. … The thread was not wound properly on the bobbin. Wind the bobbin thread properly.
What is the remedy when the upper thread breaks?
Remedies: Check the threading order and thread correctly. Adjust the tension disc. Replace blunt or bent needles.