Frequent question: Why is my sewing machine sewing loose stitches?

How do you fix a looping stitch?

Looped stitches are usually caused by improper tension. If the loop is on the upper side, it may be corrected by loosening the top tension or by tightening the lower tension. If the loop is on the under side, it is usually best corrected by adjusting the upper tension.

What are three possible causes of skipped stitches?

10 reasons for skipped stitches

  • Improper threading.
  • Poor clamping or insufficient pressure (flagging).
  • The needle needs replacing.
  • Wrong size needle.
  • Wrong type of needle for the material.
  • Lubrication.
  • Wrong thread for the application.
  • Poor quality thread.

Why is my thread loose on the bottom?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

What tension should I use for cotton?

Cotton requires a moderate tension setting, usually between three and four. Always start adjusting your tension settings with your upper tension.

THIS IS FUN:  Is 8 ply double knit?