How easy is it to make curtains?

What are the easiest curtains to make?

The cheapest (and easiest) curtains to make are tab top. The panels aren’t as gathered so they use up less fabric than a pair made with header tape.

How do I start making curtains?

How to Make Curtains

  1. 1.Measure. If you’ve ever done a DIY, you probably know at this point that the first step is to measure—and that you should really measure twice before making the first cut! …
  2. Cut fabric. …
  3. Pin and sew one side. …
  4. Create lining hem. …
  5. Sew second side. …
  6. Flip curtain right-side out. …
  7. Create rod pocket. …
  8. Iron.

How do you make easy unlined curtains?

Making Unlined Curtains

  1. Cut the fabric to the required size, allowing 10cm (4″) for side hems and adding 20cm (8″) to the length for top and bottom hem allowances. …
  2. Turn in a double 2.5cm (1″) hem at each side and pin.
  3. Turn up a double 7.5cm (3″) hem at the lower edge and pin.
  4. Mitre both bottom corners.

Is it cheaper to make curtains?

Apart from saving just small pennies for your curtains, you should also consider if it’s time-wise for you; convenience is a big factor these days. Sewing curtain fabrics might be cheaper, but it sure do cost you a lot of time.

How much material is needed for curtains?

Fabric calculations – Most curtains will require somewhere between 1 ½ and 2 ½ times fullness, depending on the heading and look you want to achieve. I always prefer to be generous and use 2 ½ times the width, skimpy curtains don’t look good and you can always use any extra fabric for cushions or tie backs.

THIS IS FUN:  What should my bobbin tension be?