Is the bobbin supposed to spin?

Why is my bobbin not spinning?

Bobbin Case Not Turning

First, it may be that your bobbin thread tension is too tight. … The other source may be due to your bobbin thread winding up under uneven tension. To fix this issue, you will need a new bobbin, wind the thread slowly and make sure the tension is nice and even.

Why is my bobbin jumping?

The bobbin was installed in the bobbin case wrong. Remove the bobbin from the bobbin case and reinstall the bobbin according to the instruction manual. … The thread was not wound properly on the bobbin. Wind the bobbin thread properly.

How do you fix a bobbin that jumps?

– Make sure you are using the correct bobbin for your machine. – Check that the thread was wound correctly on the bobbin. – Make sure the bobbin was properly inserted. Re-install the bobbin if necessary.

Why is my thread bunching up on the bottom?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

THIS IS FUN:  What can I make with a serger sewing machine?

Why won’t My Brother sewing machine pick up the bobbin thread?

Check the upper thread. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly. – Re-thread your machine, if necessary.