Question: Do you need special thread for an Overlocker?

What thread should I use for Overlocker?

For perfect results on your overlocker and coverstitch machine it is essential to use a good quality thread that is lint free. For that reason we only stock the highest quality Polyester 120’s and 180’s overlocking thread.

Can you use sewing machine thread in an Overlocker?

Answer: Although you can use seger thread which usually comes in large spools and cones, on a sewing machine with a special stand, it isn’t recommended. Serger thread is more light weight than standard sewing machine thread because it feeds through the serger at extremely high speeds.

Can I use regular thread in a serger?

You can use normal thread in a serger, but it’s a lot more expensive and unnecessary. You’ll probably run out in about 20 minutes. You probably don’t want to use overlock thread on a regular machine unless you’re having one of those out-of-thread-at-midnight emergencies, because it isn’t as strong.

Can you use normal needles in an Overlocker?

Overlock machines less than 10 years old can, for the most part, be use with home sewing machine needles. … When you insert the sewing needle, it should fit the same as if you were installing it in a home sewing machine. The round end of the shaft faces you and the flat side of the shaft should slide in easily.

THIS IS FUN:  How do I count the rows in garter stitch?

Is overlocker thread the same as sewing machine thread?

Serger thread is finer than regular sewing machine thread, in order to avoid bulky seams. It must be smooth and consistent in diameter since it passes through so many guides in a serger. Serger thread should not leave a lot of lint, so that it does not clog the serger.

Why does my overlocker thread keep breaking?

The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. … Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound.

Can I use embroidery thread for serger?

You can use decorative thread with a serger. Yes, that’s right! You are no longer limited and can use any heavy-weight decorative thread. Metallic, variegated, the sky’s the limit!

Do Sergers use bobbins?

Instead of a bobbin, sergers use looper threads. The looper threads help to lock your needle thread in place. The most basic serger stitch is the overlock stitch, which is where the term “overlocker” originated. Depending on your serger model, you may have anywhere from two to eight threads on your machine.

When should I use an overlocker?

If your sewing time is limited, an overlocker can help you whiz through your projects quickly and efficiently. An overlocker can be used for many finishes including construction of garments, through to finishing off the edges of fabric that will then be seamed on the sewing machine.

THIS IS FUN:  Why does my crochet blanket keep getting smaller?