Which way should the bobbin face?
Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise. 4. Pull the thread through the slot (A) and then to the left.
Which direction should the bobbin turn when inside the bobbin case?
Insert bobbin counterclockwise
Place your bobbin inside. Make sure the thread unwinds to the left (counterclockwise direction). Guide the thread through the slit in the needle plate cover. This is important because it makes the thread enter the ‘tension spring’ of the bobbin case.
Where do you put a threaded bobbin and where does the thread from the bobbin go when the machine is in use?
Load your wound bobbin into its case.
Place your bobbin in the round slot; your machine will have an arrow showing which way the bobbin should face to unspool correctly. Then, pull the end of the bobbin thread through your machine’s tension spring and replace the bobbin cover.
Why is my bobbin thread not catching?
Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
What is a thread guide?
noun In a sewing-machine, a device, as a loop or an eye, for guiding the thread when it is necessary to change the direction at any point between the spool and the eye of the needle.