Should the bobbin spin clockwise or counterclockwise?

Does bobbin direction matter?

Make sure the bobbin thread unrolls in the correct direction when installing the bobbin into the bobbin case. … If the thread unrolls in the wrong direction, the needle may break or the thread tension will be incorrect. Use a bobbin that has been correctly wound with thread.

Are all sewing machine bobbins the same?

Types of Bobbins

Bobbins not only come in different sizes, but also in metal as well as plastic, and empty as well as pre-wound. While machines can only use one bobbin size, whether it is plastic or metal does not typically matter, however consult your machine manual to be sure.

Is the bobbin supposed to spin?

Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise.

What happens if I use the wrong bobbin?

The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.

THIS IS FUN:  How much yarn do I need to make a blanket with roving?

Where do you put a threaded bobbin and where does the thread from the bobbin go when the machine is in use?

Load your wound bobbin into its case.

Place your bobbin in the round slot; your machine will have an arrow showing which way the bobbin should face to unspool correctly. Then, pull the end of the bobbin thread through your machine’s tension spring and replace the bobbin cover.

Why is my bobbin thread not catching?

Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.