On your electronic sewing machine it will be located just above the needle area. It will have what looks like a U turn icon.
Locate your reverse stitch knob, button or switch. Reverse stitch mechanisms are most often located on the front of your machine, either on the center of the faceplate, above the needle or on the left-most front.
Why won’t my Kenmore sewing machine reverse?
You need to open the panel for the light and check inside. Normally there is pieces of thread that are wrapped around the levels or stuck inside the machine. Take a pair of tweezers and remove all these pieces of thread and try again. This should fix your problem.
How do you fix a sewing machine that sews backwards?
Machine is stuck on reverse
- Turn the machine off.
- The reverse button may be stuck in the reverse position. …
- Check that you have selected the correct stitch. …
- Make sure you are holding down the button while sewing 3-5 stitches. …
- Remove bobbin and clean the bobbin area.
Sewing reverse/reinforcement stitches
(Reverse/Reinforcement stitch button) is kept pressed. With reinforcement stitches, 3 to 5 stitches are sewn at the same place. With reverse stitches, the stitching is sewn in the opposite direction. (Reverse/Reinforcement stitch button) will sew reverse stitches.