Why is zig zag stitch loose?

What is wrong with my zigzag stitch?

Try some of the simple things first. Remove the bobbin plate using a screwdriver and then remove the bobbin. Clean out any lint that may be under the bobbin and which may cause your zigzag stitch not to work. Replace the bobbin and the bobbin plate and test your zigzag stitch.

Why are my stitches wobbly?

Probable Causes: – Top or bobbin thread is not set correctly. – The bobbin thread could be wound incorrectly. …

What should the tension be for a zig zag stitch?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

What is the purpose of a zigzag stitch?

One of the most common uses for the zigzag stitch is to sew stretchy materials. When sewing a material that stretches, such as knitted fabrics and neoprene, it’s essential to use a stitch that can stretch with the fabric.

Why is my bottom stitch looping?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

THIS IS FUN:  Frequent question: Why is it important to learn knitting?