Frequent question: Why do I keep breaking needles on my sewing machine?

Why am I breaking so many needles on my sewing machine?

There could be several reasons why the needle keeps breaking. Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible. The needle could have been damaged or bent. … The combination of needle size, thread size and fabric is incorrect.

How often do sewing machine needles break?

Odds are, the secret culprit here is a needle that is broken, bent, or otherwise damaged. Experts recommend that you replace your needles for every 16 hours of stitching time.

What is remedies of needle breaks?

Needle Thread Breakage

Cause Remedy
Broken check spring. Replace and adjust.
Sharp edges on throat plate, hook point, needle guard, bobbin case, needle groove or eye. Polish rough edges and replace if necessary. Replace the needle being used with a higher quality needle.

Why does my needle keep bending?

Straight away you can see if the needle is rocking back and forth or is it laying perfectly flat! Check for a loose presser foot, or has the plate under the presser foot become loose. … Pulling the fabric causes the needle to bend while the machine is stitching. A bent needle will hit the bobbin case and snap.

THIS IS FUN:  Why is Pattern important in weaving?

How often should you clean and lubricate a sewing machine?

The rule of thumb is to lubricate the machine after every three to four bobbin changes. Or clean and lubricate the hook area after each day of sewing.

How do I know if my bobbin tension is correct?

The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.