What are the effects of improper threading the sewing machine?
Uneven stitch and uneven feed
Uneven stitch and feed makes the form of a working product distort and fabrics not sewn firmly. If you have used thread of low quality, threaded the machine incorrectly, or pulled the fabric when trying to make it pass through the presser foot, it is likely that the issue will occur.
How will you regulate the length of the stitch?
The length of a stitch is regulated by the thumbscrew in the slot on the front of the uprise of the machine. To LENGTHEN the stitch, loosen the thumbscrew and move the lever DOWN. To SHORTEN the stitch, loosen the thumbscrew and move the lever UP.
What do you think will happen if you not follow health and safety precautions in the workplace?
Decrease in Productivity, Increase in Turnover
If you fail to recognise the importance of health and safety, your business may face a decrease in productivity and an increase in staff turnover as morale falls. … Everyone should feel safe when they go to work. If they don’t, chances are they’ll look elsewhere.
What are the minor sewing machine troubles?
HERE are 10 most common trouble areas of a sewing machine:
- Change the Needle. …
- Clean the Machine. …
- Check the Top Threading. …
- Quality Thread. …
- Bobbin thread not in the bobbin tension. …
- Not having your machine cleaned annually. …
- Wrong bobbin. …
- Needle not high enough.
What should be remembered to keep the sewing machine last longer?
Always keep your sewing machine well oiled. All dust should be removed from the exposed parts at least once every week, and the important parts of the machine should be oiled. Use good quality sewing machine oil.
How often should you clean and lubricate the sewing machine?
The rule of thumb is to lubricate the machine after every three to four bobbin changes. Or clean and lubricate the hook area after each day of sewing.
What regulates the length of stitches in sewing machine?
3.01 SEWING MACHINE PARTS
|regulates the length of the stitch||stitch length control|
|located directly under the needle; usually has guidelines to help keep stitching straight||needle or throat plate|
|turns on the light and the machine||power switch, on-off switch|
|raises and lowers the presser foot||presser foot lifter|