Your question: How do you disassemble a brother knitting machine?

Why is my knitting machine getting stuck?

If you are knitting with two or several threads of machine yarn, you may get the problem that now and then the machine takes only one of the threads. This, too, may easily cause some loops to get stuck in the gate pegs. The cause may be that the machine needs oiling. … So, you have to wind the threads separately.

Can I use WD40 on my knitting machine?

You can use WD40 on just about anything metal, Knitting Machines being one of them.

How do you remove rust from knitting needles?

If there are small patches of rust on the needle, you can gently rub away the rust with fine sandpaper or glass paper until you start to see bright metal, don’t overdo this or you will start to wear away the needle. Sometimes if there is a lot of rust you will not be able to save the needles.

How do you wash knitting needles?

For this, clean your needles with a clean, dry muslin or paper towel, then apply a very thin layer of natural bee’s wax. Allow it to dry and then buff it with soft muslin or chamois cloth and leave for at least 24 hours before using them for knitting.

What is white lithium grease good for?

White lithium grease is used to keep components moving smoothly, free of friction and seizing. You can also apply it preventatively to protect against rust and corrosion. White lithium grease can be used to: Lubricate car door hinges.

THIS IS FUN:  You asked: Why weaving preparation is so important?