What lowers and raises the feed dog?
The feed dog position switch is located on the rear of the machine on the base. – Make sure that the needle is in its highest position. – Slide the drop feed lever to the left (as seen from the rear of the machine) and turn the hand wheel one complete turn to raise the feed dogs.
Why won’t my sewing machine feed the fabric through?
If Fabric Is Not Feeding Properly
Lower the presser foot and resume sewing. Another reason the machine may not be feeding fabric is that the feed dogs (or feed teeth) are disengaged, so make sure that they are properly engaged for sewing. … The machine may also not feed fabric if the stitch length control is set to “0”.
Where is the feed dog lever on Singer sewing machine?
The feed dogs are located in the area above and behind the bobbin case. Some sewing machines have a drop feed lever to the right of this bobbin case in the hook area. You can move the feed dog lever to raise or lower the feed dogs.
Why won’t my feed dogs go up?
1) Make sure that your presser foot is in the raised (up) position. … 1) Make sure that your presser foot is in the raised (up) position. 2) Push the feed dog lever towards the side that indicates the UP position. 3) Next manually turn the hand wheel towards you; until you hear the feed dogs click back into place.