How easy is it to sew curtains?

Are curtains easy to make?

Curtains may look really tricky but they are easy to sew!

If you think about it the seams of curtains are all straight, so if you can use a tape measure and sew in a straight line, you can make curtains. … Just start simple, ideally with a plain fabric, and progress as your confidence improves.

Can I hand sew a curtain?

If you don’t have access to a sewing machine, aren’t pressed for time and are confident that your hand sewing is neat enough to be on display, it’s quite feasible to sew a set of double layer curtains by hand.

How do you make easy unlined curtains?

Making Unlined Curtains

  1. Cut the fabric to the required size, allowing 10cm (4″) for side hems and adding 20cm (8″) to the length for top and bottom hem allowances. …
  2. Turn in a double 2.5cm (1″) hem at each side and pin.
  3. Turn up a double 7.5cm (3″) hem at the lower edge and pin.
  4. Mitre both bottom corners.

Is it cheaper to make curtains?

Apart from saving just small pennies for your curtains, you should also consider if it’s time-wise for you; convenience is a big factor these days. Sewing curtain fabrics might be cheaper, but it sure do cost you a lot of time.

THIS IS FUN:  Quick Answer: How hard is it to sew?

How can I hang curtains without a sewing machine?

While the curtains are still hanging, fold the bottom of the curtains under to the desired length. Use the stick pins to hold, to keep it folded and in place. Bring the curtain bottom up to the ironing board and iron a crease on the new fold. Cut off excess curtain a couple of inches past the fold and remove the pins.

How much fabric do you need to make curtains?

Fabric calculations – Most curtains will require somewhere between 1 ½ and 2 ½ times fullness, depending on the heading and look you want to achieve. I always prefer to be generous and use 2 ½ times the width, skimpy curtains don’t look good and you can always use any extra fabric for cushions or tie backs.

How do you calculate curtains?

There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).