Do I need to adjust bobbin tension?
If the bobbin case doesn’t move at all when you jerk it the tension is too tight and you need to decrease the tension for sewing with this thread. … If the bobbin case drops quickly the tension is too loose and you need to increase the tension.
How much tension should a bobbin have?
Proper bobbin tension is essential to good embroidery. If tension is too tight, unwanted bobbin thread may begin to show on top of your garment and you may begin to experience frequent thread breaks which wastes time and money. Bobbin tensions should be 18 to 22 grams (up to 25 grams when embroidering caps).
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why does my sewing machine keep jamming underneath?
Lack of tension on the upper thread
However certain you are that the problem with the machine is most likely due to a huge tangled mess of thread in the bobbin underneath the fabric, the most common reason for the jamming is usually the lack of sufficient tension in the upper thread.
Why is the tension wrong on my sewing machine?
Needles, threads, and fabrics: Different thread sizes and types on top and in the bobbin can throw off basic tension settings. A needle that’s too large or small for the thread can also unbalance your stitches, because the size of the hole adds to or reduces the total top tension.
Why is my thread looping?
Looped stitches are usually caused by improper tension. If the loop is on the upper side, it may be corrected by loosening the top tension or by tightening the lower tension. … Looping of stitches is sometimes caused by placing the bobbin in the bobbin case the wrong way.