What should my stitch length and width be?
The average stitch length is 2.5mm. This is the typical setting on newer sewing machines. Older machines usually give you a range of about 4 to 60 which tells you how many stitches per inch; the equivalent of 2.5mm is about 10-12 stitches per inch. The smaller the stitch length number, the smaller the stitch.
What is a normal stitch length?
The average stitch length for mid-weight fabrics is 2.5 to 3 mm/10 to 12 spi. The average stitch length for fine fabrics is 2 mm/13 to 20 spi. For heavier fabrics, basting, or topstitching, use 4 to 5 mm/5 to 6 spi.
What is the tension setting on cotton?
Cotton requires a moderate tension setting, usually between three and four.
What should the tension be set at on a Singer sewing machine?
The target figure should be around 30 to 40g. (1-1/4 to 1-1/2 oz) but it does not have to be too precise. However most people don’t have a spring balance handy, so alternatively you can tie a weight of the correct amount onto the thread and then jerk the bobbin gently upwards.
How do I know if my bobbin tension is correct?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.