What should the tension be on a Brother sewing machine?

What is the correct tension for a Brother sewing machine?

The normal tension setting is 4.0. The upper thread and the bobbin thread should cross near the center of the fabric. Only the upper thread should be visible from the right side of the fabric, and the bobbin thread should be visible from the wrong side of the fabric.

What tension should I use for cotton?

Cotton requires a moderate tension setting, usually between three and four.

Why is my thread bunching up on the bottom?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

Why is the tension wrong on my sewing machine?

Needles, threads, and fabrics: Different thread sizes and types on top and in the bobbin can throw off basic tension settings. A needle that’s too large or small for the thread can also unbalance your stitches, because the size of the hole adds to or reduces the total top tension.

How should one thread the sewing machine correctly?

How to Thread a Sewing Machine

  1. Wind a bobbin. The bobbin is the lower spool of thread for your machine. …
  2. Load your wound bobbin. …
  3. Place the spool. …
  4. Thread through the thread guide. …
  5. Pull the thread through the U-shaped guide. …
  6. Wrap the thread around the thread take-up lever. …
  7. Thread the needle. …
  8. Catch the thread.
THIS IS FUN:  How does embroidery promote the way of life?