Why does my bobbin thread show up on top?

What do you do when the bobbin thread is on top?

If the upper tension is too tight the bobbin thread with be showing on the top side of the material. Press the minus key on the screen to loosen the tension. – If the upper tension is too loose most of the upper thread will be showing on the bottom the material.

Why is my bottom thread bunching up?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

Does the bobbin thread show on top or bottom?

Your bobbin thread should not show through the top layer of stitching. It will only be seen on the back of the item. The reason you want to use a lightweight thread is to avoid too much bulk on the back of the item.

What thread tension should I use?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

THIS IS FUN:  What brand of sewing machine is made in America?

Why is my sewing machine making loops?

Looped stitches are usually caused by improper tension. … Looping of stitches is sometimes caused by placing the bobbin in the bobbin case the wrong way. Check your machine’s manual for directions on inserting the bobbin. There may be lint, dirt, or thread between tension discs.

How often should you clean and lubricate the sewing machine?

The rule of thumb is to lubricate the machine after every three to four bobbin changes. Or clean and lubricate the hook area after each day of sewing.